Plantation shutters in College Station

Shallow openings

48% of homes were built in 2000 or later. Newer windows are often set close to the room side of the wall, and handles, cranks and alarm sensors stick out into the space a louver swings through. Measure the depth to the glass and to anything that sticks out; the designer checks it against the louver size you pick.

Choosing a louver size

Apartments and condos

49% of homes are in buildings of two or more units. Balcony and patio doors suit bypass or bifold panels rather than hinged ones, which need floor space to swing. Check what your HOA or building allows to show from outside before you order: most rules are about the colour seen through the glass.

Patio door shutters

Rounded drywall corners

82% of homes here were built from 1980 on, and many houses of that era have rounded ("bullnose") drywall corners around the windows instead of square returns. A shutter can't sit flat against a curve: choose an outside mount with a frame that clears the corner, or an inside mount if the flat part of the opening is deep enough for your louvers.

How to measure

Renting?

65% of homes are rented. Shutters screw into the window frame or casing, so ask your landlord before you install; taking them down later leaves only screw holes to fill.

Summer sun

On the 117 days a year above 90°F, closed louvers keep direct sun off the glass and out of the room. In a window that takes afternoon sun, white and light paint finishes stay cooler to the touch than dark stains.

Humid summers

Hot days and 46.4 inches of precipitation make for heavy summer air. Wood swells when it's humid, so give kitchens, bathrooms and laundry rooms some air: run the fan after a shower and tilt the louvers open so steam doesn't sit behind them.

Why poplar