Plantation shutters in Conroe

Shallow openings

61% of homes were built in 2000 or later. Newer windows are often set close to the room side of the wall, and handles, cranks and alarm sensors stick out into the space a louver swings through. Measure the depth to the glass and to anything that sticks out; the designer checks it against the louver size you pick.

Choosing a louver size

Rounded drywall corners

83% of homes here were built from 1980 on, and many houses of that era have rounded ("bullnose") drywall corners around the windows instead of square returns. A shutter can't sit flat against a curve: choose an outside mount with a frame that clears the corner, or an inside mount if the flat part of the opening is deep enough for your louvers.

How to measure

Manufactured homes

6% of homes are mobile or manufactured homes, whose windows usually sit in thin walls with little depth inside the opening. An outside mount on a frame is the reliable choice there, fixed into the framing around the window rather than the thin wall panel.

Why poplar

Apartments and condos

36% of homes are in buildings of two or more units. Balcony and patio doors suit bypass or bifold panels rather than hinged ones, which need floor space to swing. Check what your HOA or building allows to show from outside before you order: most rules are about the colour seen through the glass.

Patio door shutters

Summer sun

On the 105 days a year above 90°F, closed louvers keep direct sun off the glass and out of the room. In a window that takes afternoon sun, white and light paint finishes stay cooler to the touch than dark stains.

Humid summers

Hot days and 51.1 inches of precipitation make for heavy summer air. Wood swells when it's humid, so give kitchens, bathrooms and laundry rooms some air: run the fan after a shower and tilt the louvers open so steam doesn't sit behind them.

Why poplar