Plantation shutters in Amarillo

Out-of-square openings

With 60% of homes built before 1980, many openings have had decades to settle. Measure each one's width at the top, middle and bottom, and both diagonals. If the diagonals differ by more than about ¼ inch, add a mounting frame in the designer, or choose an outside mount so the shutter covers the uneven edges.

How to measure

Replacement windows

46% of homes went up between 1950 and 1979, and most of them have had their original windows replaced since. A replacement window often sits further into or out of the wall than the old one, so the depth you have for an inside mount may differ from window to window in the same house. Measure every opening rather than copying one.

Choosing a louver size

Whole-house orders

With 70% of homes detached, most orders here cover a whole house: bedrooms, a patio door, perhaps a bay. Put every window in one list in the designer so the louver size and colour match from the street, and if you have an HOA, send it the drawings before you order.

Bay window shutters

Cold winters

With 117 freezing nights a year, warm room air meets cold glass for months. Shutters closed tight overnight hold that air against the window, so condensation can collect on the sill: tilt the louvers open in the morning, and wipe the sill on windows that often run wet.

Why poplar

Summer sun

On the 82 days a year above 90°F, closed louvers keep direct sun off the glass and out of the room. In a window that takes afternoon sun, white and light paint finishes stay cooler to the touch than dark stains.