Toronto and the GTACall (647) 975-0936

Window shutters in Halton Hills

Shutters made to fit the windows in Halton Hills's homes: how old they are, how to measure them, and whether to mount inside or outside the opening.
Level 1 (flat) moulding, paint stage 1, 3½-inch louvers, tilting open and closed.

The windows in Halton Hills's homes

By age, 20% of Halton Hills's homes went up in 1960 or earlier, 26% between 1961 and 1980, 26% between 1981 and 2000 and 28% in 2001 or later.

In Milton, 14 km away, 19% of homes are built in 1980 or earlier, 27 points fewer than here.

Sources: Statistics Canada, 2021 Census of Population; Environment and Climate Change Canada, Canadian Climate Normals 1991–2020. Daylight and sun height: calculated from the city’s latitude.

Deep sills and wide casings

20% of homes are older still (in 1960 or earlier), and older walls are often thicker. A deep opening lets an inside-mounted shutter sit flush with the wall and take the widest 4½ in louvers.

Choosing a louver size

Low winter sun through south windows

In December the midday sun is only 23° above the horizon here, so it reaches deep into rooms through south-facing windows. Louvers tilted with the room-side edge up send that light toward the ceiling instead of across a screen or a sofa.

Measure each side three times

With 46% of homes built in 1980 or earlier, openings that have shifted over the years are common. Measure the width at the top, middle and bottom and the height at the left, centre and right, then check both diagonals. If the diagonals differ by more than about ¼ in, a mounting frame covers the difference.

How to measure

Ways to mount window shutters in Halton Hills
FeatureInside mountOutside mountOn a mounting frame
SitsWithin the openingOn the wall or casingWithin or over the opening
Needs depth for the louversYesNoSome
Hides an uneven openingNoYesYes
LookBuilt inFramed, like trimFinished edge all round

Where our shutters fit

Every Shutter Boys shutter is made from solid American poplar to the measurements you take, then shipped to Halton Hills for you to fit. You choose the mount for each window in the designer, and we check the depth against the louver you pick.

The designer shows the price of each window as you add it, in Canadian dollars.

Talk to your rep in Halton Hills

Call the Shutter Boys GTA line, or book a free design consultation by video or phone: we go through your windows, the style and colour, and how to measure them.

Shutter Boys on GoogleShutter Boys on Google (second listing)

Call (647) 975-0936

Price your windows

Choose Canada in the designer, enter millimetres or inches, and we reply with your quote in Canadian dollars.

Design your shutters