Plantation shutters in Mount Vernon

Plaster walls and deep casings

46% of homes date from before 1950, when walls were plaster on lath and windows sat in deep wood casings. Plaster cracks if you drive screws carelessly: drill a pilot hole, use fixings made for plaster, and fix into the casing or the framing behind it. A deep casing is good news for an inside mount; measure its depth before you choose a louver size.

How to install

Apartments and condos

68% of homes are in buildings of two or more units. Balcony and patio doors suit bypass or bifold panels rather than hinged ones, which need floor space to swing. Check what your HOA or building allows to show from outside before you order: most rules are about the colour seen through the glass.

Patio door shutters

Out-of-square openings

With 82% of homes built before 1980, many openings have had decades to settle. Measure each one's width at the top, middle and bottom, and both diagonals. If the diagonals differ by more than about ¼ inch, add a mounting frame in the designer, or choose an outside mount so the shutter covers the uneven edges.

How to measure

Renting?

57% of homes are rented. Shutters screw into the window frame or casing, so ask your landlord before you install; taking them down later leaves only screw holes to fill.

Wet months

50.1 inches of precipitation a year keeps the air damp for long stretches. Steam and condensation are hard on any joint, so in kitchens, bathrooms and laundry rooms keep the air moving and wipe water off the sill before it sits.

Why poplar