Plantation shutters in Escondido

Manufactured homes

7% of homes are mobile or manufactured homes, whose windows usually sit in thin walls with little depth inside the opening. An outside mount on a frame is the reliable choice there, fixed into the framing around the window rather than the thin wall panel.

Why poplar

Replacement windows

43% of homes went up between 1950 and 1979, and most of them have had their original windows replaced since. A replacement window often sits further into or out of the wall than the old one, so the depth you have for an inside mount may differ from window to window in the same house. Measure every opening rather than copying one.

Choosing a louver size

Out-of-square openings

With 47% of homes built before 1980, many openings have had decades to settle. Measure each one's width at the top, middle and bottom, and both diagonals. If the diagonals differ by more than about ¼ inch, add a mounting frame in the designer, or choose an outside mount so the shutter covers the uneven edges.

How to measure

Apartments and condos

35% of homes are in buildings of two or more units. Balcony and patio doors suit bypass or bifold panels rather than hinged ones, which need floor space to swing. Check what your HOA or building allows to show from outside before you order: most rules are about the colour seen through the glass.

Patio door shutters

Dry summers, wet winters

Barely any of the year's precipitation falls in June, July and August; most comes in the cool months. Wood takes on moisture in the wet season and gives it back in the dry one, so expect the panels to feel slightly tighter in winter than in summer. Fit them in the season you're in, and leave the hinge screws a quarter turn from tight until they've been through both.