Plantation shutters in Carson

Replacement windows

67% of homes went up between 1950 and 1979, and most of them have had their original windows replaced since. A replacement window often sits further into or out of the wall than the old one, so the depth you have for an inside mount may differ from window to window in the same house. Measure every opening rather than copying one.

Choosing a louver size

Out-of-square openings

With 77% of homes built before 1980, many openings have had decades to settle. Measure each one's width at the top, middle and bottom, and both diagonals. If the diagonals differ by more than about ¼ inch, add a mounting frame in the designer, or choose an outside mount so the shutter covers the uneven edges.

How to measure

Manufactured homes

8% of homes are mobile or manufactured homes, whose windows usually sit in thin walls with little depth inside the opening. An outside mount on a frame is the reliable choice there, fixed into the framing around the window rather than the thin wall panel.

Why poplar

Whole-house orders

With 72% of homes detached, most orders here cover a whole house: bedrooms, a patio door, perhaps a bay. Put every window in one list in the designer so the louver size and colour match from the street, and if you have an HOA, send it the drawings before you order.

Bay window shutters

Dry summers, wet winters

Barely any of the year's precipitation falls in June, July and August; most comes in the cool months. Wood takes on moisture in the wet season and gives it back in the dry one, so expect the panels to feel slightly tighter in winter than in summer. Fit them in the season you're in, and leave the hinge screws a quarter turn from tight until they've been through both.