Window shutters in Kamloops

Shutters made to fit the windows in Kamloops's homes: how old they are, how to measure them, and whether to mount inside or outside the opening.
Level 1 (flat) moulding, paint stage 1, 3½-inch louvers, tilting open and closed.

The windows in Kamloops's homes

By age, 11% of Kamloops's homes went up in 1960 or earlier, 40% between 1961 and 1980, 26% between 1981 and 2000 and 24% in 2001 or later.

In Vernon, 88 km away, 43% of homes are built in 1980 or earlier, 8 points fewer than here.

Sources: Statistics Canada, 2021 Census of Population; Environment and Climate Change Canada, Canadian Climate Normals 1991–2020. Daylight and sun height: calculated from the city’s latitude.

Low winter sun through south windows

In December the midday sun is only 16° above the horizon here, so it reaches deep into rooms through south-facing windows. Louvers tilted with the room-side edge up send that light toward the ceiling instead of across a screen or a sofa.

Measure each side three times

With 51% of homes built in 1980 or earlier, openings that have shifted over the years are common. Measure the width at the top, middle and bottom and the height at the left, centre and right, then check both diagonals. If the diagonals differ by more than about ¼ in, a mounting frame covers the difference.

How to measure

Inside or outside the opening

An inside mount sits within the window opening and looks built in, but it needs enough depth for the louvers to tilt. An outside mount fixes to the wall or casing around the window, which suits shallow openings and hides uneven edges. The designer asks which you want for each window.

How to measure

Ways to mount window shutters in Kamloops
FeatureInside mountOutside mountOn a mounting frame
SitsWithin the openingOn the wall or casingWithin or over the opening
Needs depth for the louversYesNoSome
Hides an uneven openingNoYesYes
LookBuilt inFramed, like trimFinished edge all round

Where our shutters fit

Every Shutter Boys shutter is made from solid American poplar to the measurements you take, then shipped to Kamloops for you to fit. You choose the mount for each window in the designer, and we check the depth against the louver you pick.

The designer shows the price of each window as you add it, in Canadian dollars.

Price your windows

Choose Canada in the designer, enter millimetres or inches, and we reply with your quote in Canadian dollars.

Design your shutters