Window shutters in Lethbridge
The windows in Lethbridge's homes
By age, 18% of Lethbridge's homes went up in 1960 or earlier, 27% between 1961 and 1980, 22% between 1981 and 2000 and 33% in 2001 or later.
In Foothills County, 133 km away, 27% of homes are built in 1980 or earlier, 18 points fewer than here.
Sources: Statistics Canada, 2021 Census of Population. Daylight and sun height: calculated from the city’s latitude.
Low winter sun through south windows
In December the midday sun is only 17° above the horizon here, so it reaches deep into rooms through south-facing windows. Louvers tilted with the room-side edge up send that light toward the ceiling instead of across a screen or a sofa.
Deep sills and wide casings
18% of homes are older still (in 1960 or earlier), and older walls are often thicker. A deep opening lets an inside-mounted shutter sit flush with the wall and take the widest 4½ in louvers.
Cranks, handles and shallow frames
In the 33% of homes built in 2001 or later, windows are often set close to the room side of the wall, with crank or lever handles. Measure from the glass, or the handle if it sticks out further, to the face of the trim: that depth decides whether you mount inside, outside or on a frame.
| Feature | Inside mount | Outside mount | On a mounting frame |
|---|---|---|---|
| Sits | Within the opening | On the wall or casing | Within or over the opening |
| Needs depth for the louvers | Yes | No | Some |
| Hides an uneven opening | No | Yes | Yes |
| Look | Built in | Framed, like trim | Finished edge all round |
Where our shutters fit
Every Shutter Boys shutter is made from solid American poplar to the measurements you take, then shipped to Lethbridge for you to fit. You choose the mount for each window in the designer, and we check the depth against the louver you pick.
The designer shows the price of each window as you add it, in Canadian dollars.
More about shutters in Lethbridge
Window shutters near Lethbridge
- Foothills County 133 km
- Okotoks 140 km
Price your windows
Choose Canada in the designer, enter millimetres or inches, and we reply with your quote in Canadian dollars.