Window shutters in Winston-Salem

Shutters made to fit the windows in Winston-Salem's homes: how old they are, how to measure them, and whether to mount inside or outside the opening.
Level 1 (flat) moulding, paint stage 1, 3½-inch louvers, tilting open and closed.

The windows in Winston-Salem's homes

By age, 12% of Winston-Salem's homes went up before 1950, 36% between 1950 and 1979, 27% between 1980 and 1999 and 25% in 2000 or later.

Half of them are older than 1981, which is the age of window you're most likely measuring here.

In High Point, 17 miles away, 40% of homes are built before 1980, 8 points fewer than here.

Sources: U.S. Census Bureau, American Community Survey 5-year estimates, 2020–2024; NOAA U.S. Climate Normals 1991–2020. Daylight and sun height: calculated from the city’s latitude.

Measure each side three times

With 48% of homes built before 1980, openings that have shifted over the years are common. Measure the width at the top, middle and bottom and the height at the left, centre and right, then check both diagonals. If the diagonals differ by more than about ¼ in, a mounting frame covers the difference.

How to measure

Wide windows split into sections

32% of homes are apartments or condos, where windows are often wide. A wide opening is split into several panels joined by T-posts at the window's own mullions, so the shutter lines up with the glass behind it.

Shutters in condos

Inside or outside the opening

An inside mount sits within the window opening and looks built in, but it needs enough depth for the louvers to tilt. An outside mount fixes to the wall or casing around the window, which suits shallow openings and hides uneven edges. The designer asks which you want for each window.

How to measure

Ways to mount window shutters in Winston-Salem
FeatureInside mountOutside mountOn a mounting frame
SitsWithin the openingOn the wall or casingWithin or over the opening
Needs depth for the louversYesNoSome
Hides an uneven openingNoYesYes
LookBuilt inFramed, like trimFinished edge all round

Where our shutters fit

Every Shutter Boys shutter is made from solid American poplar to the measurements you take, then shipped to Winston-Salem for you to fit. You choose the mount for each window in the designer, and we check the depth against the louver you pick.

The designer shows the price of each window as you add it, in US dollars.

Price your windows

Pick your look once, add every window, and see each one drawn and priced. Send it to us and we reply with your quote.

Design your shutters