Plantation shutters in Bowling Green

Apartments and condos

48% of homes are in buildings of two or more units. Balcony and patio doors suit bypass or bifold panels rather than hinged ones, which need floor space to swing. Check what your HOA or building allows to show from outside before you order: most rules are about the colour seen through the glass.

Patio door shutters

Shallow openings

38% of homes were built in 2000 or later. Newer windows are often set close to the room side of the wall, and handles, cranks and alarm sensors stick out into the space a louver swings through. Measure the depth to the glass and to anything that sticks out; the designer checks it against the louver size you pick.

Choosing a louver size

Renting?

63% of homes are rented. Shutters screw into the window frame or casing, so ask your landlord before you install; taking them down later leaves only screw holes to fill.

Rounded drywall corners

63% of homes here were built from 1980 on, and many houses of that era have rounded ("bullnose") drywall corners around the windows instead of square returns. A shutter can't sit flat against a curve: choose an outside mount with a frame that clears the corner, or an inside mount if the flat part of the opening is deep enough for your louvers.

How to measure

Humid summers

Hot days and 50 inches of precipitation make for heavy summer air. Wood swells when it's humid, so give kitchens, bathrooms and laundry rooms some air: run the fan after a shower and tilt the louvers open so steam doesn't sit behind them.

Why poplar

Cold winters

With 81 freezing nights a year, warm room air meets cold glass for months. Shutters closed tight overnight hold that air against the window, so condensation can collect on the sill: tilt the louvers open in the morning, and wipe the sill on windows that often run wet.

Why poplar